Water, Noise & Air
Range : 0 14 pH, 0 to ±1999 mV, Accuracy 0.01 pH ±1, ±2 mV with
: 0 to 200,000 micro ohms in 5 selected ranges, resolution 0.01 micro ohms in
lowest range, complete with conductivity cell, stand, holder for 230 V, 50 Hz,
0-1, 0-10, 0-100, 0-1000 NTU, Reproducibility ±3% of FSD, with test tubes, for
230 V, 50Hz.
: 0 20 ppm, Accuracy : ±1% of full scale, Resolution 0.1 ppm, Temperature
range : -5 to +45°C. Accuracy ±0.5°C and Resolution : 0.1°C with 3 Digit LCD
display, with Cathode : Gold, Anode : Silver, membrane, FEP Teflon, with
temperature, thermister based probe, with one 9V battery.
/ TDS / TEMP. PORTABLE METER
epoxy double junction pH electrode, EC consen 91W, cell constant 1.0 and
electrode holders and free carrying kit contains calibrating solutions and one
rinse bottle with compartments for storing the meter and electrode.
of oxygen demand with oxi-top controller OC 100 and oxitop-C meas. System Mercury
free, for 6 meas. Oxitop control 6 and BOD instrument for 12 meas,
oxitop control 12.
AND EFFLUENT TESTS METHODS
pollution testing purpose.
in various sizes. Supplied with ceramic working table asbestos inner lining,
additional power plant, with built-in/external exhaust assembly, PVC ducting,
with rain guard, floor leveling screws.
(JAR TEST APPARATUS)
water effluent treatment, etc. Consisting of geared motor with electronic speed
control from 20 to 100 RPM, illuminator base, consists of fluorescent tube for
diffused cold light to flock samples. Available in 3, 4 or 6 test models having
capacity of 1, 2 liters beaker capacities.
wide application in water analysis with data storage functions, DPD Method for
water analysis with rectangular cells for direction measurements of alkalinity,
aluminum, ammonia, boron, bromine, chloride, LR/HR, Chloride dioxide, copper,
cynuric acid, fluoride, hydrazine, hydrogen peroxide, iron, manganese, molybdate,
Nitrate, Ozone, pH, phosphate, silica dioxide, sodium hypo chlorite, etc.
Different test like COD, BOD can be performed.
ABSORBANCE SPECTROPHOTOMETER (AAS)
length range from 190 900 nm, for the analysis of various elements. With
burner head of 10 cm slot, Nebuliser assembly, Deutorium lamp, Drain tube,
Teflon tube for sample suction, Hose assembly for air, Hose assembly of C2H2 ,
Hose band RS 232-C connection cable, AC cable for 220/230V, Computer, Regulators
and gases are available at extra cost. Various Hollow cathode lamps are
available at extra cost.
Demineraliser Mixed Bed to produce IP grade deionised water and to bring
down the dissolved solids to less than 1 mg/lit. Deionised water will have
the conductivity of less than 1 ms/cm and pH of 6.8 to 7.00. Available from 70
lit/hr to 1500 lit/hr.
LEVEL METER DIGITAL
range 30 dB to 130 dB in two ranges : 30 80 dB and 80 130 dB with
battery eliminator, standard noise source, head phone with carrying case.
VOLUME AIR SAMPLER
gaseous sampling attachment, with all standard accessories.
sampler - With probe, dry gas meter, etc.
b) Fyrite analyser - For CO2 , O2
c) Dust sampler Respirable - For gaseous sampling etc.
d) Smoke meter
e) Gas monitor - For combustible gas portable.
f) Explosive Gas detector
g) Carbon Monoxide Gas Monitor
h) Hydrogen Sulphide Gas monitor
i) Flame Detector
j) Gas Leak Alarm
k) Oxygen Meter Hand held
l) Orsat Gas Analysis Apparatus - Various models.
m) Combustible Gas Monitor For hydrogen,
acetylene, Hexane, Naphtha,
Hydrogen sulphide, CO2 , Ammonia Chlorine
n) Stack velocity monitor For measuring temperature and velocity of
flue gases with various
For single and multi-parameters.
gas detector for LPG, Hydrogen, LEL, Hydrogen gas, Acetylene gas, Naphtha,
Hexane gas detector.
Hydrogen, Acetylene, Hexane, Naphtha, Methane, Hydrogen Sulphide gas
MONOXIDE GAS MONITOR HANDHELD
SULPHIDE GAS MONITOR - HANDHELD
GAS TELE MONITORING SYSTEM - CONTINUOUS